News Items Listed for Aircraft Management


Cutter Aviation becomes Authorized Pilatus Sales & Service Center for Southwest United States

April 3rd, 2018   PHOENIX, Arizona – Cutter Aviation has been appointed as the Authorized Pilatus Sales & Service Center for the Southwest United States. Cutter Aviation joins the award-winning Pilatus network to provide sales and service for the PC-12 NG and PC-24 Super Versatile Jet in the Southern California, Arizona, New Mexico, Texas, and Colorado Region. Cutter Aviation, […] Read More Here

Cutter Aviation Kicks-Off Year-long 90th Anniversary Celebration at 2017 NBAA-BACE in Las Vegas

Cutter Aviation - 90th Anniversary

October 12th, 2017   Third generation family-owned businesses are not very common these days, much less one that has been in business and prospered for 90 years. Cutter Aviation is one such business. The company was started by William P Cutter in 1928 when he flew into Albuquerque as a traveling barnstormer, met a girl and knew he had […] Read More Here

Cutter Aviation proudly adds two HondaJet aircraft to its Charter Fleet

HondaJet - Cutter Aviation Charter Fleet

December 20th, 2016   Cutter Aviation announced it has completed the necessary requirements to begin operating the revolutionary new HondaJet on its FAA Part 135 Air Carrier Certificate. Two new HondaJet Aircraft have begun operations from Cutter Aviation and the first ever FAA Part 135 charter flight in a HondaJet will depart this week from Cutter Aviation Phoenix Sky […] Read More Here

Cutter Aviation: Operating at full throtle at almost 90 years young

Fuel Farm Installation Cutter Aviation (COS)

September 2nd, 2016   A little over a year ago Phillips 66® Aviation featured Cutter Aviation as its Featured FBO. And what’s new with the oldest family-owned and operated FBO in the U.S.? A lot. A whole lot. Cutter Aviation may be operating in its golden years as it approaches its 90th anniversary, but shows absolutely no signs of […] Read More Here

Cutter Aviation Purchases Hangar Complex at Addison Airport

May 20th, 2016   Cutter Aviation, the oldest family owned and operated general aviation company in the US, today announced the purchase of a 60,650 square feet hangar and office complex on 3.5 acres at Addison Airport in Addison TX. The complex consists of two 15,000 square foot hangars with 7,400 square feet of attached office space and one […] Read More Here

Cutter Aviation announces new dates for “An Evening With Cutter” Roadshow to introduce the HondaJet in Southern California and Las Vegas, Nevada

HondaJet Southwest - Cutter Aviation

April 19th, 2016   Cutter Aviation announced that they will be hosting events throughout Southern California and Las Vegas, Nevada, to promote the launch of the new HondaJet. The events, will demonstrate the capabilities of the new HondaJet, as well as Cutter Aviation’s commitment to an exceptional aircraft buying experience. Cutter Aviation representatives and pilots will be on hand […] Read More Here

The HondaJet Receives Certification in Mexico

HondaJet Southwest - Cutter Aviation

March 16th, 2016   The world’s most advanced light jet to make Aero Expo debut in Toluca GREENSBORO, N.C. — March 16, 2016 — Honda Aircraft Company announced today that the HondaJet has received type certification from the Civil Aviation Safety Authority of Mexico, the Dirección General de Aeronáutica Civil (DGAC). The world’s most advanced light jet also will […] Read More Here

HondaJet Receives Type Certification From Federal Aviation Administration

HondaJet Southwest - Cutter Aviation

December 9th, 2015   GREENSBORO, N.C. — Dec. 9, 2015 — The HondaJet received type certification from the United States Federal Aviation Administration (FAA) on Tuesday. Honda Aircraft Company and the FAA made the announcement today at the Honda Aircraft headquarters in Greensboro, North Carolina. The FAA presented the type certificate to Honda Aircraft Company President and CEO Michimasa […] Read More Here

HondaJet Nears Federal Aviation Administration Type Certification

HondaJet Southwest - Cutter Aviation

November 17th, 2015   Honda Aircraft Company concluding function and reliability testing LAS VEGAS — Nov. 17, 2015 — Honda Aircraft Company announced today that it has completed all function and reliability (F&R) test conditions and is concluding F&R flights for the HondaJet. The announcement was part of a program update shared at the National Business Aviation Association Convention […] Read More Here

First Production HondaJet Takes to the Skies

Hondajet Southwest Cutter Aviation

June 27th, 2014   Flight Marks Milestone Toward Entry into Service in 2015 GREENSBORO, N.C. — June 27, 2014 — Honda Aircraft Company announced today that the first production HondaJet achieved its initial flight, marking another milestone toward aircraft certification and entry into service in 2015. The event took place at the company’s world headquarters in Greensboro, North Carolina. […] Read More Here