Contact us

How can we help you?

Aircraft Maintenance & Service at SAT

210.340.6780
Contact

Contact Kevin Reedy

How can we help you?

Kevin Reedy
Manager of Aircraft Services, SAT
210.485.1315
SAT

San Antonio International Airport

10440 John Cape Road, Suite 101, San Antonio, TX 78216

Hours of Operation

0700-1600 / Mon.-Fri.

Cutter Aviation at San Antonio International Airport is an FAA Designated Repair Station and AFAC-certified maintenance facility providing scheduled and unscheduled aircraft & engine maintenance, repair and inspection service for a wide range of aircraft from single-engine piston aircraft through multi-engine turbine aircraft.  Our professional team of factory-trained aircraft service technicians, A&P mechanics, and Inspectors are ready to provide excellent service at an honest and fair price, unmatched attention to detail, and a commitment to the safety of you and your aircraft at all times.

Map

+

Airport Diagram

+

24/7 AOG

Full support and Parts Service Center Capabilities. We provide 24/7, AOG and on-site services for your Aircraft. 

You can count on Cutter Aviation’s technical support team for all your emergencies. Our experts will be glad to assist you.

210.340.6780

Our Factory Authorized capabilities include:

  • FAA Part 145 Repair Station: Certificate #U7TR491Y
  • Honda Aircraft Company, HA-420 Hondajet Authorized Service Center
  • GE Honda Aero HF120 Engine Authorized Service Center
  • Authorized Service Center for Piper Aircraft
  • Authorized Service Center for Daher TBM
  • Authorized Dealership & Installation for Blackhawk Modifications
  • Pratt and Whitney PT6 service and hot section capability
  • NiCad battery service
  • Sheet metal repair and modifications
  • Boroscope inspection ready
  • Propeller, fan and rotor dynamic balance capability, including spectrum analysis for vibration
  • Lycoming authorized service center
  • Teledyne Continental engine repair and fuel system set up
  • Air conditioning service, including both R12 and R134A
  • Pressurization testing and repair capability
  • NDI non-destructive testing in both wet and dry magnet particle and fluorescent penetrant, level II
  • Factory-trained A&P and I.A. staff
  • U7TR491Y Class III Part 145 Repair Station
â–º
â–º

Enjoyed the premium Cutter experience?

Visit our customer testimonials page and share your recent experience at Cutter Aviation.

Customer Testimonials

Bruce/Andy/Larry and the entire Cutter SAT Team did a fantastic job on the annual, pre-purchase, and prop overhaul of my recently purchased Piper Merdian.

Greg Oswald    KSAT - San Antonio, TX   

SAT's personnel provide me excellent service and keep me informed of the work performed. I am referring other operators of PC-24s to service their planes there and their PC-24 experience and numbers will grow. I chose them 1. for the people there, who prioritize my need for aircraft availability for my owner. 2. because I have relatively easy transportation to SAT and back, either drive or airlines. 3. they have been a great resource for information in my support.

Will Bentley    KSAT - San Antonio, TX   

We were AOG. Bruce got Ben Allen to us in a matter of hours. They worked through the weekend to get us back in the air.

Chad Salter    KSAT - San Antonio, TX   

The whole team at Cutter makes my ownership experience so easy and seamless. That, combined with the M600 being a truly wonderful product, has made me a very happy customer.

Lewis Donzis    KSAT - San Antonio, TX   

You guys got me in and out the same day after landing gear problem indication problem.

Joe Brininstool    KSAT - San Antonio, TX   

Annual Inspection was performed on time & delivered when promised. Work was excellent. No squawks!

Marvin Hammond    KSAT - San Antonio, TX   

Troubleshooting an issue is not always easy or understood by some of todays aircraft mechanics. However, Scott at Cutter SAT was wonderful to work with. He brought his many years of experience to bear in our need for understanding of the systems needing attention. His professionalism and knowledge greatly aided in our ability to make progress with the issue at hand.

Tim Geil    KSAT - San Antonio, TX   

This was the most amazing maintenance team I have ever experienced. They all came in on their day(s) off to get our three AOG Piper Archers up and running. We were stuck in San Antonio, with no help from our company, trying to get back to California. They were SO helpful and constantly communicated. EXTREMELY amazing hospitality, even offered to give us rides to our hotel. My team could not have continued without this help. Thank you Andy, Bobby, Will,

...read more
Mackenzie Degn    KSAT - San Antonio, TX   
Mackenzie Degn    KSAT - San Antonio, TX   

This was the most amazing maintenance team I have ever experienced. They all came in on their day(s) off to get our three AOG Piper Archers up and running. We were stuck in San Antonio, with no help from our company, trying to get back to California. They were SO helpful and constantly communicated. EXTREMELY amazing hospitality, even offered to give us rides to our hotel. My team could not have continued without this help. Thank you Andy, Bobby, Will, and Lane from San Antonio Cutter Aviation.

Very efficient staff and knowledgeable service tech. They are excited about the TBM and it was evident.

Mike McKee    KSAT - San Antonio, TX   

We have a great relationship with Cutter and Andy always keeps us up to date on everything going on.

BJ Blanchard    KSAT - San Antonio, TX   

Contact James Fisher

How can we help you?

Contact Kevin Reedy

How can we help you?

    Technical Services Staff

  • See Bio

    James Fisher

    Engine Program Sales and Client Relationship Manager
    X
    James Fisher
    Engine Program Sales and Client Relationship Manager
    602.267.4067

    James Fisher is the Engine Program Sales and Client Relationship Manager for Cutter Aviation. James brings with him 25 years of solid aviation experience. Fisher began his career as an A&P mechanic and has held management positions with increasing responsibilities throughout the Aviation Industry. He held several positions in his 15 years at Pratt & Whitney Canada as an Engine Line Manager, Materials Manager, Operation Manager, and Continuous Improvement Manager for ACE (Achieving Competitive Excellence). In his last position as Director of Maintenance for N1 LLC his duties included setting up a heavy maintenance shop for the Honeywell HTF 7000, developing a Mobile Repair Team (MRT), implementing logistics, and managing the Fleet Maintenance Program for all Flexjet Aircraft in Arizona. He was also responsible for managing the operations of the repair station in West Virginia.

    James enjoys his leisure time watching or playing sports, specifically baseball.

    602.267.4067
  • See Bio

    Kevin Reedy

    Manager of Aircraft Services, SAT
    X
    Kevin Reedy
    Manager of Aircraft Services, SAT
    210.485.1315

    Kevin Reedy is the Manager of Aircraft Service at Cutter Aviation in San Antonio, Texas. With more than 30 years of experience in aircraft maintenance, quality assurance, maintenance management and customer service within the Aeronautical Industry, Kevin has the knowledge that is needed to successfully maintain and oversee all the safety policies of Cutter Aviation.  He came to Cutter in November 2011 as the Aircraft Maintenance Supervisor, was promoted to Maintenance Manager in 2015 then went on to be the Chief Inspector/Accountable Manager in 2017.  With each role he has held, Kevin has proven his reliability and effectiveness and quickly became an asset to the company.

    Kevin was first introduced to aviation as a teenager, flying around with his Stepfather in a Cessna 182.  From then on, he was hooked and went on to have a lifelong career in aviation.  In his spare time, he enjoys camping, off-roading, fishing, and spending time with his kids and grandkids.

    210.485.1315