Contact us

How can we help you?

HondaJet Aircraft Services

HondaJet Services Offered at Cutter Aviation

Cutter Aviation is an FAA certified repair station that offers comprehensive full-service airframe services, inspections, support, avionics and interior refurbishment.

Engine Services

  • Dedicated Engine Technical Support/Sales on staff
  • Overhaul and Engine repairs with Approved OEM Facilities
  • Hot Section Inspections
  • Compressor and Turbine Wash
  • Annual and 100 Hour Inspections
  • Borescope Inspections
  • Troubleshooting and Repair

Airframe Inspections

All inspection Documents / Phase inspections – Calendar, hourly, cycle

Technicians

Our Pilatus service teams consist of experienced aviation professionals including: 

  • Licensed A&P technicians with factory-authorized training
  • IA-qualified aircraft inspectors
  • Chapter 4 / Chapter 5 Research Experts
  • Sales and support

Paint

Cutter Aviation can provide basic paint services 

  • General touch-up
  • Tail number change – cowl, vertical tail
  • Control surface & panel re-paint, touch-up (landing gear / gear doors)

Airframe Services

  • HondaJet Service Center
  • Annual Inspections
  • 100 Hour Inspections
  • Corrosion Inspections & Repair
  • Wing Pull Inspections
  • NDT Services available.
  • Touch up and component Painting 
  • Aircraft Cleaning and Detailing
  • Technical evaluations
  • Troubleshooting
  • Structural Repairs
  • Door frame repairs
  • Air conditioning repairs

Avionics

Cutter Aviation provides comprehensive avionics and instrument overhaul and repair services. We specialize in custom installations and retrofit systems and are an authorized avionics service center for all the top equipment manufacturers (Universal, Collins, Honeywell, Bendix/King, Garmin, Avidyne, Aspen, Gogo, and more). Specialties for any of the above manufacturers include: 

  • Garmin Service Center for HondaJet Airframes
  • HAPP
  • MPP
  • 91.411 and 91.413 Pitot Static Systems inspection and tests.
  • 91.207 ELT inspections
  • Service and Repair 
  • Installation and Upgrade Capabilities
  • Satellite, lightning and weather radar systems
  • Terrain and traffic warning systems
  • WAAS GPS Navigation Systems
  • WiFi (voice and data), cabin and passenger entertainment systems
  • Autopilot Systems
  • Glass panel upgrades
  • Digital engine monitoring

Interior Refurbishment

  • Soft goods refurbishment
  • Installation of custom carpets
  • Air stair step-tread replacement
  • Custom thermal and acoustic insulation packages
  • Crew and cabin seat refurbishment
  • Safety harness re-webbing
  • Custom plating

Contact us

How can we help you?

Contact us

How can we help you?

Contact us

How can we help you?

Contact us

How can we help you?

Contact us

How can we help you?

    Technical services staff

  • See Bio

    Will D. Cutter

    Regional Maintenance Sales Manager
    X
    Will D. Cutter
    Regional Maintenance Sales Manager
    Email

    Will D. Cutter is the Regional Maintenance Sales Manager for Cutter Aviation Addison and San Antonio, TX locations. He is the dedicated point of contact for client ownership experience and is in charge of expediting post-sale maintenance to include managing and coordinating action plans with approved service centers.

    Will brings a valuable mix of industry knowledge to this role, particularly in the area of piston and turboprop products. Prior to joining Cutter Aviation, Will worked for Piper Aircraft, Inc. as a Marketing Analyst in their Digital Marketing division. Will gained in-depth understanding of Piper’s competitive advantages, target markets and client base while developing a new Customer Relationship Management system. Will also supported Piper’s marketing efforts through website curation and advertisement creation. Life-long exposure to the aviation industry coupled with his previous experience makes Will a remarkable addition to the Cutter Aviation team.

    Will is an FAA rated private pilot, currently pursuing his Instrument Rating and is looking forward to being certified to fly every aircraft Cutter Aviation sells. As a graduate of The University of Arizona, Will received a Bachelor of Science Degree with a concentration in Economics.

    Email
  • See Bio

    James Fisher

    Engine Program Sales and Client Relationship Manager
    X
    James Fisher
    Engine Program Sales and Client Relationship Manager
    Email

    James Fisher is the Engine Program Sales and Client Relationship Manager for Cutter Aviation. James brings with him 25 years of solid aviation experience. Fisher began his career as an A&P mechanic and has held management positions with increasing responsibilities throughout the Aviation Industry. He held several positions in his 15 years at Pratt & Whitney Canada as an Engine Line Manager, Materials Manager, Operation Manager, and Continuous Improvement Manager for ACE (Achieving Competitive Excellence). In his last position as Director of Maintenance for N1 LLC his duties included setting up a heavy maintenance shop for the Honeywell HTF 7000, developing a Mobile Repair Team (MRT), implementing logistics, and managing the Fleet Maintenance Program for all Flexjet Aircraft in Arizona. He was also responsible for managing the operations of the repair station in West Virginia.

    James enjoys his leisure time watching or playing sports, specifically baseball.

    Email
  • See Bio

    Adam Parish

    Manager of Aircraft Services, PHX
    X
    Adam Parish
    Manager of Aircraft Services, PHX
    Email

    Adam Parish is the Manager of Aircraft Services at Cutter Aviation Phoenix Sky Harbor. With over twenty-six years of accomplishments in avionics and maintenance sales, management, business development, STC development, avionics/maintenance installations and repair, he is an asset to the avionics team. Adam joined Cutter Aviation in 2003 with a position in Avionics Sales, and was eventually promoted to Avionics Sales Manager. He left the company in 2008 to pursue other opportunities and returned to Cutter Aviation in 2017.

    Previously, Adam was a Project Manager at Executive Aircraft Maintenance and a Director of Sales at Crownair Companies. He began his aviation career as an avionics and maintenance technician in the United States Air Force, working on heavy military refueling and transport aircraft as well as search and rescue helicopters.

    Email
  • See Bio

    Bruce Tanis

    Manager of Aircraft Services, SAT
    X
    Bruce Tanis
    Manager of Aircraft Services, SAT
    Email

    Bruce Tanis as Manager of Aircraft Services for Cutter Aviation in San Antonio, TX. Bruce is responsible for managing all aspects of the maintenance operation including cost-effective utilization of department resources to meet or exceed service, avionics and aircraft upgrade requirements requested from Cutter Aviation’s maintenance customers.

    Bruce was raised around aviation and is the son of Peter Tanis, the inventor of the Tanis Engine Preheater. Growing up, Bruce’s family owned several FBOs and maintenance facilities where as soon as he was able to see over the engine cowling, he was helping in the shop.

    While attending school at Northwestern Bible College, Bruce worked as a line technician at Anoka County Blaine Airport. He later received an associate’s degree in Aviation Maintenance from Lake Area Technical College in South Dakota. After receiving his A&P License and becoming an IA, Bruce went on to work for several prestigious aviation companies which provided him with unparalleled experience in a wide array of airframes including Piper, King Air, Beechcraft, Honda, Hawker, TBM, Quest and Cessna aircraft as well as commercial airliners.

    Bruce has a Private Pilot License with SEL and MEL ratings. He is married and has two adult sons, who also followed in his family’s aviation path. When not working, he enjoys golf, playing music and most of all spending time with his grandkids.

    Email
  • See Bio

    Christopher Gradisar

    Manager of Aircraft Services, ADS
    X
    Christopher Gradisar
    Manager of Aircraft Services, ADS
    Email

    Christopher Gradisar is Cutter Aviation’s Manager of Aircraft Services in Addison, Texas. Mr. Gradisar is responsible for managing all aspects of the maintenance operation including the successful implementation of maintenance work order projects and cost-effective utilization of department resources to meet or exceed the service, avionics, and aircraft upgrade requirements requested from Cutter Aviation’s maintenance customers.

    Mr. Gradisar began his career with Cutter Aviation in 2005 when he was hired as Chief Inspector for Cutter’s maintenance facility at Dallas Executive Airport. In 2012 Christopher accepted the position as Service Supervisor where he directed the day-to-day operations for the shop. He started his aviation career working as an A&P for an aircraft maintenance provider in Pueblo, CO and later moved to Dallas, TX and worked as a floor inspector with Raytheon Aircraft.

    Christopher enjoys working on home improvement projects in his spare time as well as sailing and racing his MacGregor 26S sailboat. Mr. Gradisar also enjoys spending time with his two grown children and 15-month-old granddaughter.

    Email