King Air Series – C90, E90, F90, B-200, B-300 and B-350 Services Offered at Cutter Aviation
Cutter Aviation is an FAA certified repair station that offers comprehensive full-service airframe services, inspections, support, avionics and interior refurbishment.
| Cutter Aviation Dallas-Addison (ADS) | ||
 |
4500 Claire Chennault Drive Addison, TX 75001 469.518.5770 phone |
Hours of Operation 0700-1600 / Mon – Fri |
| Cutter Aviation Phoenix Sky Harbor (PHX) | ||
 |
2802 E. Old Tower Road Phoenix, AZ 85034-6000 602.273.1237 phone |
Hours of Operation 24 Hours / 7 Days |
| Cutter Aviation San Antonio (SAT) | ||
 |
10440 John Cape Road, Suite 101 San Antonio, TX 78216 210.340.6780 phone |
Hours of Operation 0730-1730 / Mon.-Fri. |
Engine Services
- Dedicated Engine Technical Support/Sales on staff
- Overhaul and Engine Repairs with P&WC authorized overhaul facilities
- Hot Section Inspections
- Compressor and Turbine Wash
- Annual and 100 Hour Inspections
- Borescope Inspections
- Troubleshooting and Repair
- Blackhawk Upgrades
Airframe Services
- Technical evaluations
- Troubleshooting
- Structural Repairs (including composites)
- Door frame repairs
- Corrosion repairs
- Air conditioning repairs
Airframe Inspections
Phase 1-4 inspections – Calendar, hourly, cycle
Technicians
Our service teams consist of experienced aviation professionals including:
- Licensed A&P technicians with factory-authorized training
- IA-qualified aircraft inspectors
- Chapter 4 / Chapter 5 Research Experts
- Sales and support
Avionics
Cutter Aviation specializes in custom installations and retrofit systems, and are an authorized avionics service center for all the top equipment manufacturers (Universal, Collins, Honeywell, Bendix/King, Garmin, Avidyne, Aspen, Gogo, and more).
Specialties for any of the above manufacturers include:
- Satellite, lightning and weather radar systems
- Terrain and traffic warning systems
- WAAS GPS Navigation & Flight Management Systems
- ADS-B in/out solutions
- WiFi (voice and data), cabin and passenger entertainment systems
- Autopilot Systems
- Glass panel upgrades
- Digital engine monitoring
Modifications
Cutter Aviation is a factory authorized service and installation center for the following:
- Blackhawk engine retrofit (X42, X52, X61 and X135A)
- BLR Winglets (C90, B-200 and B-300)
- BLR Whisper Prop (C90, B-200 and B-350)
- Raisbeck Kits – Hartzell Quiet Turbofan Propellers, Swept Blade Propellers, Ram Air Recovery System, Dual Aft Body Strakes, Enhanced Performance Leading Edges, High Flotation Gear Doors, and Crown Wing Lockers
Interior Refurbishment
Interior Services
- Soft goods refurbishment.
- Installation of custom carpets
- Air stair step-tread replacement
- Custom thermal and acoustic insulation packages.
- Crew and cabin seat refurbishment
- Safety harness re-webbing
- Custom plating
Paint
Cutter Aviation can provide basic paint services
- General touch-up
- Tail number change – cowl, vertical tail
- Control surface & panel re-paint, touch-up (landing gear / gear doors)
- Modifications touch-up – winglet, wing lockers, body strakes
Raisbeck Ram Air Recovery System for King Air
Available for all 200/B200 King Airs. Installation by Cutter Aviation Technical Services.
Raisbeck Swept Blad Propellers for King Air
Available for all 200/B200 and 90 series King Airs. Installation by Cutter Aviation Technical Services.
Raisbeck Engineering Dual Aft Body Strakes for King Air
Available for all King Air models. Installation by Cutter Aviation Technical Services.
Raisbeck Enhanced Performance Leading Edges
Available for all 200/B200 King Airs. Installation by Cutter Aviation Technical Services.
Raisbeck Engineering High Flotation Gear Doors
Available for 350, B200, 200, 100, A100, B100 and F90 models. Installation by Cutter Aviation Technical Services.
Raisbeck Engineering Crown Wing Lockers for King Air
Available for King Air 300/350, 200/B200, C90GT, C90 (all), and E90 models. Installation by Cutter Aviation Technical Services.
Raisbeck Engineering / Hartzell Quiet Turbofan Propellers
Available for these King Air models: 200/B200/B200GT, C90GT/C90GTi, C90 (all), 100, A100, A90, B90, E90 and F90. Installation by Cutter Aviation Technical Services.
